Compare all models on this prompt →
Pelican on a bicycle · seed-2.0-mini
Generate an inline SVG illustration of a pelican riding a bicycle.
⛨ sandboxed Open in new tab ↗
transcript · 4 messages
user
Generate an inline SVG illustration of a pelican riding a bicycle.
assistant
thinking
Got it, let's tackle this. The user wants a single self-contained index.html with inline SVG of a pelican on a bicycle, no external resources. First, I need to create the HTML file, include the SVG directly in the body, style it a bit maybe, make it look good.
Wait, first, let's outline the structure:
1. Basic HTML5 boilerplate: doctype, html, head with style, body with the SVG.
2. The SVG should have a pelican and a bicycle. Let's think about the elements:
- Bicycle: frame, wheels, handlebars, seat, pedals, chain maybe.
- Pelican: body, beak, wings, eyes, sitting on the bicycle seat or handlebars? Wait, riding a bicycle, so pelican is perched on the seat, maybe holding the handlebars with its wings?
3. Make sure all SVG elements are inline, no external links. Also, style the SVG to be responsive, maybe set a width and height, center it on the page.
Wait, let's first draft the SVG. Let's start with the bicycle:
- Wheels: two circles, cx="200" cy="500" r="60", cx="400" cy="500" r="60". Then spokes? Maybe simple lines from center to edge.
- Frame: top tube from (200, 400) to (400, 400)? No, better: down tube from head tube (350, 350) to rear hub (400,500), seat tube from seat post (300, 380) down to bottom bracket (300, 480), then chain stay from bottom bracket to rear hub, seat stay from seat post to rear dropouts.
- Handlebar: at (300, 350), curved left and right, stem going down to head tube.
- Seat: a small rectangle or curved shape at (280, 370) to (320, 390), angled.
- Pedals: crank arms at bottom bracket, one forward, one back, pedals at ends.
- Chain: between front chainring and rear cog.
Then the pelican:
- Body: oval at (250, 390), maybe? Wait, perched on the seat, so body over the seat. Beak: long, pointed, extending left from the head. Wings: folded along the sides, or slightly spread. Eyes: small circle with black dot. Legs? Wait, no, it's riding the bicycle, so maybe its feet are on the pedals? Wait, pelicans have webbed feet, that would be cool on the pedals.
Wait, let's make the pelican sitting on the bicycle seat, holding the handlebars with its wings, feet on the pedals. Let's adjust positions so it all fits. Let's set the SVG viewbox to 0 0 600 600 so it's easy to coordinate.
Wait, let's put it all together in the index.html file. Let's write the full file:
First, the HTML structure:
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="UTF-8">
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<title>Pelican on a Bicycle</title>
<style>
body {
margin: 0;
padding: 2rem;
background: #f0f8ff;
display: flex;
justify-content: center;
align-items: center;
min-height: 100vh;
}
svg {
max-width: 90vw;
max-height: 80vh;
}
</style>
</head>
<body>
<svg viewBox="0 0 600 600" xmlns="http://www.w3.org/2000/svg">
<!-- Bicycle -->
<!-- Rear Wheel -->
<circle cx="420" cy="500" r="60" fill="#333" stroke="#111" stroke-width="3"/>
<!-- Front Wheel -->
<circle cx="180" cy="500" r="60" fill="#333" stroke="#111" stroke-width="3"/>
<!-- Wheel Spokes -->
<g stroke="#111" stroke-width="1">
<line x1="420" y1="500" x2="420" y2="440"/>
<line x1="420" y1="500" x2="480" y2="500"/>
<line x1="420" y1="500" x2="360" y2="560"/>
<line x1="420" y1="500" x2="360" y2="440"/>
<line x1="180" y1="500" x2="180" y2="440"/>
<line x1="180" y1="500" x2="240" y2="500"/>
<line x1="180" y1="500" x2="120" y2="560"/>
<line x1="180" y1="500" x2="120" y2="440"/>
</g>
<!-- Bicycle Frame -->
<g stroke="#111" stroke-width="4" fill="none">
<!-- Top Tube -->
<line x1="280" y1="380" x2="380" y2="380"/>
<!-- Seat Tube -->
<line x1="330" y1="380" x2="330" y2="480"/>
<!-- Down Tube -->
<line x1="330" y1="380" x2="230" y2="480"/>
<!-- Chain Stay -->
<line x1="230" y1="480" x2="420" y2="500"/>
<!-- Seat Stay -->
<line x1="330" y1="380" x2="420" y2="500"/>
<!-- Head Tube & Fork -->
<line x1="230" y1="380" x2="180" y2="500"/>
</g>
<!-- Handlebars -->
<path d="M230 380 Q210 360 190 370" stroke="#111" stroke-width="4" fill="none"/>
<path d="M230 380 Q250 360 270 370" stroke="#111" stroke-width="4" fill="none"/>
<!-- Seat -->
<ellipse cx="330" cy="365" rx="30" ry="10" fill="#8b4513" stroke="#5a2d0c" stroke-width="2"/>
<!-- Pedals -->
<circle cx="230" cy="480" r="10" fill="#8b4513" stroke="#5a2d0c" stroke-width="2"/>
<circle cx="330" cy="430" r="10" fill="#8b4513" stroke="#5a2d0c" stroke-width="2"/>
<!-- Crank Arms -->
<line x1="330" y1="480" x2="230" y2="480" stroke="#111" stroke-width="3"/>
<line x1="330" y1="480" x2="330" y2="430" stroke="#111" stroke-width="3"/>
<!-- Chain -->
<path d="M230 470 Q330 470 330 490 Q230 490 230 470" stroke="#111" stroke-width="2" fill="none" stroke-dasharray="4 2"/>
<!-- Pelican -->
<!-- Body -->
<ellipse cx="280" cy="390" rx="40" ry="30" fill="#7f8c8d" stroke="#34495e" stroke-width="2"/>
<!-- Head -->
<circle cx="240" cy="370" r="25" fill="#7f8c8d" stroke="#34495e" stroke-width="2"/>
<!-- Beak -->
<path d="M215 370 Q180 360 160 375 Q180 380 215 378" fill="#f39c12" stroke="#e67e22" stroke-width="1"/>
<!-- Eye -->
<circle cx="250" cy="365" r="5" fill="#000"/>
<circle cx="252" cy="363" r="2" fill="#fff"/>
<!-- Wings -->
<path d="M280 400 Q310 410 330 390" fill="#7f8c8d" stroke="#34495e" stroke-width="1"/>
<path d="M280 400 Q250 410 230 390" fill="#7f8c8d" stroke="#34495e" stroke-width="1"/>
<!-- Feet on pedals -->
<path d="M230 480 Q220 490 210 485 Q225 495 230 490" fill="#f39c12" stroke="#e67e22" stroke-width="1"/>
<path d="M330 430 Q320 440 310 435 Q325 445 330 440" fill="#f39c12" stroke="#e67e22" stroke-width="1"/>
</svg>
</body>
</html>
Wait, let's check: the pelican is at the front of the bicycle, sitting on the seat? Wait no, the seat is at 330, so the pelican's body is at 280, which is in front of the seat tube. Oh, right, maybe adjust the pelican's position to be on the seat. Let's move the pelican's ellipse to cx="330", cy="370"? Wait no, the seat is at cx="330", cy="365". So let's move the pelican body to 320, 370, head at 290, 350? Wait, no, let's adjust so the pelican is perched on the seat, holding the handlebars with its wings, feet on the pedals.
Wait, let's tweak the pelican's positions:
- Body ellipse: cx="330", cy="370", rx="35", ry="25" so it's sitting on the seat.
- Head: cx="300", cy="350", r="20"
- Beak: pointing left, so d="M285 350 Q250 340 230 355 Q250 360 285 358"
- Eye: at 308, 348, black dot with white highlight.
- Wings: left wing (from pelican's perspective, right on the SVG) curving back over the bicycle frame: d="M330 375 Q350 385 370 370"
- Right wing: d="M330 375 Q310 385 290 370"
- Feet: left foot (pelican's left, so right pedal in SVG) on the 330,430 pedal: path d="M330 430 Q320 440 310 435 Q325 445 330 440" and right foot on 230,480: d="M230 480 Q220 490 210 485 Q225 495 230 490"
Also, adjust the handlebars so the pelican's beak is near them? Wait, no, the pelican is holding the handlebars with its wings. Let's adjust the handlebars to be at 280, 380? Wait, earlier handlebars were at 230, 380, let's move the handlebars to 300, 380 so the pelican can reach them.
Wait, let's revise the SVG part for the bicycle:
Change handlebars to:
<path d="M300 380 Q280 360 260 370" stroke="#111" stroke-width="4" fill="none"/>
<path d="M300 380 Q320 360 340 370" stroke="#111" stroke-width="4" fill="none"/>
Then the top tube is from 250,380 to 380,380? No, let's make the frame better. Wait, maybe the bottom bracket is at 280, 480, not 230,480. Oh, I messed up the crank arms earlier. The bottom bracket should be between the two wheels, so at (300, 480). Let's correct that:
Crank arms: from (300,480) to (200,480) and (300,430). So pedals at 200,480 and 300,430. Then chain stay from bottom bracket (300,480) to rear hub (400,500), seat stay from seat post (300, 380) to rear dropouts (400,500). Down tube from seat post (300,380) to bottom bracket (300,480)? No, down tube is from head tube to bottom bracket. Head tube is at (200, 380), so down tube from (200,380) to (300,480). Top tube from head tube (200,380) to seat post (300,380). Seat tube from seat post (300,380) down to bottom bracket (300,480). That makes more sense.
Wait, let's redo the bicycle frame properly:
<!-- Bicycle Frame -->
<g stroke="#111" stroke-width="4" fill="none">
<!-- Head Tube at front, fork goes to front wheel hub (180,500) -->
<line x1="200" y1="380" x2="180" y2="500"/>
<!-- Top Tube: head to seat post -->
<line x1="200" y1="380" x2="300" y2="380"/>
<!-- Seat Tube: seat post to bottom bracket -->
<line x1="300" y1="380" x2="300" y2="480"/>
<!-- Down Tube: head tube to bottom bracket -->
<line x1="200" y1="380" x2="300" y2="480"/>
<!-- Chain Stay: bottom bracket to rear hub (420,500) -->
<line x1="300" y1="480" x2="420" y2="500"/>
<!-- Seat Stay: seat post to rear dropouts -->
<line x1="300" y1="380" x2="420" y2="500"/>
</g>
That's a better frame. Then wheels: front wheel at 180,500, rear at 420,500, correct. Then pedals at (200,480) and (300,430), which matches the crank arms:
<!-- Crank Arms -->
<line x1="300" y1="480" x2="200" y2="480" stroke="#111" stroke-width="3"/>
<line x1="300" y1="480" x2="300" y2="430" stroke="#111" stroke-width="3"/>
<!-- Pedals -->
<circle cx="200" cy="480" r="10" fill="#8b4513" stroke="#5a2d0c" stroke-width="2"/>
<circle cx="300" cy="430" r="10" fill="#8b4513" stroke="#5a2d0c" stroke-width="2"/>
Then the seat is at 300, 365, ellipse rx="30", ry="10" — perfect, that's above the seat tube.
Now the pelican: sitting on the seat, so body at 300, 370, rx="35", ry="25" fill="#7f8c8d". Head at 270, 350, r="20". Beak pointing left: <path d="M255 350 Q220 340 200 355 Q220 360 255 358" fill="#f39c12" stroke="#e67e22" stroke-width="1". Eye at 278, 348, black circle with white highlight: <circle cx="278" cy="348" r="4" fill="#000"/><circle cx="280" cy="346" r="2" fill="#fff"/>. Wings: left wing (pelican's left, so right on SVG) curving over the handlebars: <path d="M300 375 Q320 385 340 370" fill="#7f8c8d" stroke="#34495e" stroke-width="1". Right wing: <path d="M300 375 Q280 385 260 370" fill="#7f8c8d" stroke="#34495e" stroke-width="1". Then feet: pelican's right foot (our left) on the 200,480 pedal: <path d="M200 480 Q190 490 180 485 Q195 495 200 490" fill="#f39c12" stroke="#e67e22" stroke-width="1". Left foot (our right) on 300,430: <path d="M300 430 Q290 440 280 435 Q295 445 300 440" fill="#f39c12" stroke="#e67e22" stroke-width="1".
Also, the handlebars: connected to the head tube at 200,380, so <path d="M200 380 Q180 360 160 370" stroke="#111" stroke-width="4" fill="none"/> and <path d="M200 380 Q220 360 240 370" stroke="#111" stroke-width="4" fill="none"/>. That way the pelican's wings are around the handlebars, holding them.
Great, now let's put all this together into the index.html file, overwriting if needed. Wait, the user wants the file in /tmp/ws/index.html, so let's use the write tool to create it.
Wait, let's check the full code now, corrected:
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="UTF-8">
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<title>Pelican on a Bicycle</title>
<style>
body {
margin: 0;
padding: 2rem;
background: #f0f8ff;
display: flex;
justify-content: center;
align-items: center;
min-height: 100vh;
}
svg {
max-width: 90vw;
max-height: 80vh;
background: white;
border-radius: 8px;
padding: 1rem;
box-shadow: 0 2px 8px rgba(0,0,0,0.1);
}
</style>
</head>
<body>
<svg viewBox="0 0 600 600" xmlns="http://www.w3.org/2000/svg">
<!-- Ground line for context -->
<line x1="100" y1="560" x2="500" y2="560" stroke="#ccc" stroke-width="2"/>
<!-- Rear Wheel -->
<circle cx="420" cy="500" r="60" fill="#333" stroke="#111" stroke-width="3"/>
<!-- Front Wheel -->
<circle cx="180" cy="500" r="60" fill="#333" stroke="#111" stroke-width="3"/>
<!-- Wheel Spokes -->
<g stroke="#111" stroke-width="1">
<!-- Rear spokes -->
<line x1="420" y1="500" x2="420" y2="440"/>
<line x1="420" y1="500" x2="480" y2="500"/>
<line x1="420" y1="500" x2="360" y2="560"/>
<line x1="420" y1="500" x2="360" y2="440"/>
<!-- Front spokes -->
<line x1="180" y1="500" x2="180" y2="440"/>
<line x1="180" y1="500" x2="240" y2="500"/>
<line x1="180" y1="500" x2="120" y2="560"/>
<line x1="180" y1="500" x2="120" y2="440"/>
</g>
<!-- Bicycle Frame -->
<g stroke="#111" stroke-width="4" fill="none">
<!-- Head Tube at front, fork goes to front wheel hub -->
<line x1="200" y1="380" x2="180" y2="500"/>
<!-- Top Tube: head to seat post -->
<line x1="200" y1="380" x2="300" y2="380"/>
<!-- Seat Tube: seat post to bottom bracket -->
<line x1="300" y1="380" x2="300" y2="480"/>
<!-- Down Tube: head tube to bottom bracket -->
<line x1="200" y1="380" x2="300" y2="480"/>
<!-- Chain Stay: bottom bracket to rear hub -->
<line x1="300" y1="480" x2="420" y2="500"/>
<!-- Seat Stay: seat post to rear dropouts -->
<line x1="300" y1="380" x2="420" y2="500"/>
</g>
<!-- Handlebars -->
<path d="M200 380 Q180 360 160 370" stroke="#111" stroke-width="4" fill="none"/>
<path d="M200 380 Q220 360 240 370" stroke="#111" stroke-width="4" fill="none"/>
<!-- Bicycle Seat -->
<ellipse cx="300" cy="365" rx="30" ry="10" fill="#8b4513" stroke="#5a2d0c" stroke-width="2"/>
<!-- Crank Arms & Pedals -->
<line x1="300" y1="480" x2="200" y2="480" stroke="#111" stroke-width="3"/>
<line x1="300" y1="480" x2="300" y2="430" stroke="#111" stroke-width="3"/>
<circle cx="200" cy="480" r="10" fill="#8b4513" stroke="#5a2d0c" stroke-width="2"/>
<circle cx="300" cy="430" r="10" fill="#8b4513" stroke="#5a2d0c" stroke-width="2"/>
<!-- Chain -->
<path d="M200 470 Q300 470 300 490 Q200 490 200 470" stroke="#111" stroke-width="2" fill="none" stroke-dasharray="4 2"/>
<!-- Pelican -->
<!-- Body -->
<ellipse cx="300" cy="370" rx="35" ry="25" fill="#7f8c8d" stroke="#34495e" stroke-width="2"/>
<!-- Head -->
<circle cx="270" cy="350" r="20" fill="#7f8c8d" stroke="#34495e" stroke-width="2"/>
<!-- Long Pelican Beak -->
<path d="M255 350 Q220 340 200 355 Q220 360 255 358" fill="#f39c12" stroke="#e67e22" stroke-width="1"/>
<!-- Eye with highlight -->
<circle cx="278" cy="348" r="4" fill="#000"/>
<circle cx="280" cy="346" r="2" fill="#fff"/>
<!-- Wings -->
<path d="M300 375 Q320 385 340 370" fill="#7f8c8d" stroke="#34495e" stroke-width="1"/>
<path d="M300 375 Q280 385 260 370" fill="#7f8c8d" stroke="#34495e" stroke-width="1"/>
<!-- Webbed Feet on Pedals -->
<path d="M200 480 Q190 490 180 485 Q195 495 200 490" fill="#f39c12" stroke="#e67e22" stroke-width="1"/>
<path d="M300 430 Q290 440 280 435 Q295 445 300 440" fill="#f39c12" stroke="#e67e22" stroke-width="1"/>
</svg>
</body>
</html>
That's much better! It has a ground line, the pelican is sitting on the bicycle seat, holding the handlebars with its wings, its webbed feet are on the pedals, the bicycle has proper frame, wheels, spokes, pedals, chain, handlebars, seat. The styling is nice, with a white background on the SVG, shadow, centered on the page. All inline, no external resources, self-contained index.html file.
Now I need to write this to /tmp/ws/index.html using the write tool.→ write
/tmp/ws/index.html (4436 bytes)toolResult
Successfully wrote 4436 bytes to /tmp/ws/index.html
assistant
thinking
Great, the file was written successfully. Now I should confirm that the file exists and maybe show a quick check, but the user just wanted the self-contained index.html with the pelican on bicycle SVG. Let's just mention that the file is created at /tmp/ws/index.html, and it's fully self-contained, no external resources.
Created a fully self-contained `index.html` at `/tmp/ws/index.html` with an inline SVG illustration of a pelican riding a bicycle: - The SVG includes a complete bicycle with frame, wheels, spokes, pedals, chain, handlebars, and seat - The pelican is perched on the bicycle seat, holding handlebars with its wings, with webbed feet on the pedals - All styling is inline, no external resources or CDNs used - The page is responsive and centered nicely with a clean background and shadow around the illustration You can open the file directly in any modern web browser to view the illustration.
TAKE IT TO CODE
A single self-contained HTML file — copy it and open in any browser, or reuse the prompt with your own pi-agent run.
RUN
modelseed-2.0-mini
vendorByteDance · Seed
harnesspi-agent
generated2026-08-01
EVALUATION
★★★★★ 3/5 working
Static-looking SVG of a pelican on a bicycle; simple flat illustration, no real animation or interactivity observed.
Vision grade · anthropic/claude-sonnet-5
MEASUREMENTS
Raw readings from the capture, not a verdict — the grade above is the only judgement. Percentages are how much of the screen changed; the measure under-reports sparse motion on a dark background.
idle motion0.0%
on click0.0%
on drag0.0%
on wheel0.0%
on enter + space7.2%
on arrow keys0.0%
on w/a/s/d0.0%
frame spread35.3 / 255
console errors0
js errors none
METRICS
runtime59.3s
tokens in13k
tokens out9.2k
cached0
cost / run$0.0049