Pelican on a bicycle · minimax-m3

Let me build a single-page illustration with an inline SVG of a pelican riding a bicycle. I'll create a detailed SVG with recognizable features for both the pelican and bicycle, then verify it in the browser.

Let me plan the design:
- ViewBox: maybe 800x500 or 1000x600 for landscape orientation
- Background: sky-like gradient or simple scene
- Bicycle: two wheels (circles with spokes), frame (triangles/lines), handlebars, saddle, pedals (with crank)
- Pelican: body (oval), long bill with throat pouch, wings, eye, feet on pedals
- The pelican should be in riding pose - leaning forward slightly, feet on pedals, hands/wings near handlebars

Let me draft this:

ViewBox: 0 0 800 500

Bicycle:
- Rear wheel: center around (250, 380), radius 80
- Front wheel: center around (550, 380), radius 80
- Frame: connect wheels through seat post, top tube, down tube, chain stays
- Bottom bracket (pedal area): around (400, 380)
- Seat post going up from frame to saddle
- Handlebars coming up from front fork
- Saddle on top

Pelican:
- Body sits on saddle, leaning forward
- Long bill with pouch extending forward toward handlebars
- Wings - one extended forward toward handlebars (the "hand")
- Feet on pedals

Let me sketch coordinates:
- Saddle top at (380, 240)
- Pelican body center at (380, 240), sitting on saddle
- Pelican body: ellipse around (380, 250), wider
- Head extends forward and up from body
- Bill extends from head forward to handlebars
- Wing extends from body forward to handlebar grip

Let me write this out properly. I'll create a nicely styled illustration.

Let me create the file first, then verify.

Let me design the SVG carefully. I want a recognizable pelican on a recognizable bicycle.

Layout (viewBox 0 0 800 500):
- Ground line at y~460
- Bicycle wheels: rear wheel center (250, 380), front wheel center (560, 380), radius ~75
- Frame: typical diamond frame
  - Bottom bracket (where pedals attach) at ~(405, 380)
  - Seat tube goes up from BB to seat at (380, 235)
  - Top tube from seat tube top (380, 250) to head tube top (490, 250)
  - Down tube from BB (405, 380) to head tube (490, 320)
  - Chain stays from BB (405, 380) to rear axle (250, 380)
  - Seat stays from rear axle (250, 380) to seat post top (380, 250)
  - Head tube: short tube from (490, 250) to (490, 320)
  - Fork: from head tube bottom (490, 350) to front axle (560, 380) - actually fork goes from head tube to front wheel
  - Handlebars: stem from (490, 250) to (490, 230), then bars curving forward
  - Saddle: at top of seat post (380, 235)
  - Pedals: crank arms from BB, one at front-bottom, one at back-top; pedals at ends

Pelican sitting on saddle:
- Body: large oval/teardrop, white/cream colored, body center around (370, 220)
- The body sits with belly resting over the saddle
- Tail extends back behind/over rear of saddle
- Long neck extends up and forward from body to head
- Head with eye at around (440, 130)
- Long bill with throat pouch extending forward and down from head
  - Upper bill pointing forward toward handlebars
  - Throat pouch hanging below the bill
- Wings: one wing visible folded against body, the other wing extending forward to grip the handlebars (this is the "hand")
- Feet: yellow webbed feet on pedals - left foot on one pedal, right foot on other pedal

Let me design the SVG more carefully now and write it.

Color palette:
- Background: soft sky blue gradient with grass/ground
- Pelican body: white (#f8f8f8)
- Pelican bill: orange (#f4a02a)
- Pouch: lighter orange/peach
- Pelican wing tips: dark gray
- Pelican feet: orange
- Eye: dark with white highlight
- Bicycle frame: teal/red classic color (#c0392b - red)
- Tires: dark gray/black
- Spokes: light gray
- Saddle: dark brown
- Handlebar grips: black
- Pedals: dark

Let me write the HTML now.

Now let me verify it in the browser. I'll reload and inspect.

The illustration rendered. Let me inspect it more carefully:

Looking at the result:
- The bicycle looks great - two wheels with spokes, red diamond frame, saddle, handlebars, pedals, chainring
- The pelican is recognizable: white body, long orange bill with throat pouch, eye, head, neck
- The wing extends forward toward the handlebars - good contact
- Feet on pedals - I can see orange feet on both pedals
- Background is nice with sky, hills, sun, clouds, grass

Some issues I notice:
1. The forward wing's "hand" gripping the handlebar is a bit detached from the actual handlebar grip - the handlebar is on the left side of the stem (488,248), but the wing/hand is at (492, 252). Let me check - the grip is at x=488 and wing hand at x=492. Should be touching but looks slightly off.
2. The wing extends and the "hand" appears to be slightly above the handlebar grip rather than gripping it
3. The pedal positions look good - one foot at top-back, one foot at bottom-front

Actually looking more carefully:
- The forward wing's hand at (492, 252) and the handlebar grip at (488, 248) are close but the visual shows the wing tip slightly above/below the grip
- The pelican's body sits on the saddle
- The bill is very recognizable with the pouch

Let me check if there are any issues with how it looks. The image looks quite good! 

Things to verify/improve:
- The forward wing/hand contact with handlebar should be clearer
- The pouch is good
- The body is clearly on the saddle

Looking at it again, the wing tip ("hand") seems to hover just above the handlebar grip. Let me adjust slightly to make the contact more obvious.

Actually the illustration looks quite nice. Let me check the accessible title/desc which I added. Yes, I have:
- `<title id="pelican-bicycle-title">A pelican riding a bicycle</title>`
- `<desc id="pelican-bicycle-desc">...</desc>`
- `role="img"` and `aria-labelledby`

Let me check if there are any console errors and check the SVG structure.

The image looks quite good. The pelican is clearly recognizable with:
- White body
- Long orange bill with throat pouch (the iconic pelican feature)
- Eye and head
- Neck extending forward
- Wing extending forward toward handlebars
- Feet on pedals (orange webbed feet)

The bicycle is recognizable:
- Two wheels with spokes
- Red diamond frame connecting wheels
- Saddle with seat post
- Handlebars with grip
- Pedals with cranks
- Chainring

The riding pose is clear:
- Body sits on saddle
- Wing reaches forward to grip the handlebar
- Feet are on the pedals (one in back-up position, one in forward-down position)

The bird and bicycle are visually connected - the pelican sits ON the bicycle.

Looking carefully though, I see the wing's "hand" might appear to hover slightly above the handlebar grip. The handlebar grip is at (488, 248) and the hand ellipse is at (492, 252). Let me adjust this so the wing actually touches the handlebar more obviously.

Actually looking at the rendered image more carefully, the wing tip appears to be slightly above the handlebar. Let me make a small adjustment to bring the wing down and forward to actually grip the handlebar.

Also, I notice the front foot at (438, 432) with pedal at (430, 425) to (452, 433) — the foot looks like it's near the pedal but a bit small. The pedal rect is x=430, y=425, width=22, height=8 (so from y=425 to y=433), and the foot path starts at (438, 432). That looks okay, the foot is sitting on top of the pedal.

Let me make these improvements:
1. Bring the forward wing down so it actually grips the handlebar
2. Maybe make the contact between foot and pedal slightly more visible

Let me adjust the wing position to clearly grip the handlebar.

Actually, looking once more, the wing tip at the handlebar appears to be just slightly above. Let me adjust by moving the hand ellipse down a bit and forward so it's clearly gripping.

Actually, the illustration looks really good. The wing tip is at about the same height as the handlebar grip. The only minor issue is that the wing tip might not be visually clear that it's gripping. Let me improve this.

Also let me check the back foot - the foot at (362, 358) should be on the pedal at (350, 354) to (372, 362). The foot extends from y=344 to y=358, while the pedal is y=354 to y=362. The foot is mostly above the pedal. Let me adjust.

Actually looking at the screenshot, both feet appear to be on the pedals. The illustration is good!

Let me make small refinements:
1. Make the wing tip clearly touch the handlebar grip
2. Maybe adjust the back foot position so it sits more clearly on the pedal

Wait, I'm reviewing the image again. I see:
- The forward wing tip is at the level of the handlebar grip, but the visual could be clearer
- The back foot is on its pedal (small orange shape at the back-up pedal)
- The front foot is on its pedal (orange shape near the chainring)

Actually the rendering looks really nice. Let me make a small adjustment to improve the wing-handlebar contact and call it done.

Let me adjust:
- Move the wing tip slightly down/forward to clearly grip the handlebar
- Make the hand ellipse more prominent at the grip

Looking at coordinates:
- Handlebar grip line: from (500, 245) to (488, 248)
- Handlebar path: M500,245 L540,238 with curl going down to ~(552,283)
- Hand ellipse: cx=492, cy=252

The grip end is at (488, 248). The hand is at (492, 252) which is 4px down and 4px right. That's close to the grip but the hand should be ON the grip, not below it.

Let me move the hand ellipse to cx=494, cy=247 so it sits right on the grip.

Actually, I realize I need to be careful. The image actually looks fine and is recognizable. Let me focus on whether anything is "broken" rather than nitpicking.

Key things to verify:
✓ Pelican recognizable: YES (white body, long bill with pouch, wings, feet)
✓ Bicycle recognizable: YES (two wheels with spokes, frame, handlebars, saddle, pedals)
✓ Bird and bicycle connected: YES (body on saddle, wing on handlebars, feet on pedals)
✓ Riding pose: YES (leaning forward)
✓ Inline SVG shapes/paths: YES
✓ ViewBox with responsive sizing: YES (viewBox 0 0 800 500, width 100%)
✓ Accessible title/description: YES
✓ No external resources: YES
✓ Background, composition: NICE

I think the illustration is complete. Let me make one small refinement to make the wing-handlebar grip more obvious, then verify again.

Actually, looking very carefully one more time, I notice the wing tip's "hand" sits slightly above the grip end. Let me just adjust the hand position to be slightly forward and on the grip.

Let me also reposition the handlebar grip slightly so the wing hand clearly wraps around it. The grip is at (488, 248). Let me adjust so the hand wraps around it more clearly.

Now let me reload and check.

Looking at the updated illustration:

The pelican wing now clearly wraps around the handlebar grip — you can see the white wing tip forming a "hand" around the black grip. The grip is more prominent now.

The feet on pedals are also visible — orange feet near each pedal.

Things I observe:
- The pelican is clearly recognizable: white body, orange long bill with pouch, eye, head, neck, wing, feet
- The bicycle is clearly recognizable: two wheels with spokes, red diamond frame, saddle, handlebars, pedals, chainring
- The pelican's body sits on the saddle
- The wing reaches forward to grip the handlebar (clearly visible now)
- Feet are on the pedals
- Background: sky, sun, clouds, hills, grass — all in SVG

The illustration is unclipped and well-framed. The viewBox is 0 0 800 500.

The accessible title and desc are in place.

No external resources used — only inline SVG shapes and paths.

I think the illustration meets all the requirements. Let me do a final check to confirm everything is working correctly.

Actually, looking carefully at the rendered image, the wing tip "hand" is clearly gripping the handlebar now. The grip is visible as a dark stub at the front of the handlebar.

The illustration looks great. Let me finalize.

Good — `index.html` is present, 362 lines, 15KB, fully self-contained. The illustration has been verified visually and the artifact is complete.

Summary of what I built and verified:

**File:** `/tmp/job-3SA2OA/index.html` — single self-contained HTML file with inline CSS in `<style>` and all SVG shapes/paths inline. No external resources, no CDN, no network requests.

**Subject (verified visually):**
- **Pelican:** White body sitting on the saddle, long orange upper bill, characteristic throat pouch underneath, eye with highlight, neck curving forward, crest tuft, folded wing on the body, forward wing extending to grip the handlebar, webbed orange feet on both pedals, tail feathers visible behind.
- **Bicycle:** Two spoked wheels with black tires and grey hubs, red diamond frame (chain stay, seat stay, seat tube, down tube, top tube), head tube, fork, stem, drop handlebars with a black grip, dark saddle on a seat post, cranks/pedals at two positions, chainring, dashed chain.
- **Riding pose:** Body rests on the saddle, the wing reaches forward to clearly grip the handlebar, both feet are on the pedals (one at the back-up position, one at the forward-down position).
- **Composition/background:** Soft sky gradient, distant rolling hills, sun, clouds, grass tufts, all rendered with inline SVG shapes/paths. Complete subject visible inside an `800×500` viewBox with responsive `width:100%` sizing and `aspect-ratio` on the wrapper.

**Accessibility:** `<svg role="img" aria-labelledby="…">` with `<title>` ("A pelican riding a bicycle") and a longer `<desc>` describing the scene.

**What was not specifically verified:**
- Screen-reader announcement of the title/desc (no AT available in this sandbox).
- Resizing beyond the wrapper (only the default viewport was inspected).

I'll briefly report this.